Can I install custom firmware on the TIDRADIO TD-H9?
Yes. H9 Toolbox Firmware is free custom firmware for the TD-H9, based on the official v1.0.38 firmware. Install it from your browser with the web flasher at h9toolbox.com/firmware-update/: power the radio on while holding PTT + 2, connect it with a USB-C cable, then Connect radio, select H9 Toolbox Firmware, Backup radio, and Install.
What does H9 Toolbox Firmware add?
An app loader. Hold Back on the channel screen for a menu of apps that you add and remove over Bluetooth in the App Manager at h9toolbox.com/apps/: an onboard APRS client (station list, map, messages and sending), Brick Breaker, and more to come. The App Manager also changes the startup image (boot logo). Everything else is the stock v1.0.38 radio, and your channels and settings are not changed.
How do I add the APRS client or other apps?
Install H9 Toolbox Firmware, power the radio on normally, turn on its Bluetooth programming mode and open h9toolbox.com/apps/ in Chrome or Edge. Connect, click Add on the apps you want, then Write to radio. On the radio, hold Back on the channel screen and pick an app from the menu; RADIO returns to the normal radio.
Does the APRS app transmit?
Only when you pick a packet on its Send screen and confirm it with a second press. It sends from the callsign in the radio's APRS settings on your APRS TX channel through the radio's own transmit routine, so you need an amateur radio licence. Receiving, the map and messages never transmit.
How do I change the TD-H9 boot logo or startup screen?
Install H9 Toolbox Firmware, then open the App Manager at h9toolbox.com/apps/ (or h9toolbox.com/boot-logo/). Connect over Bluetooth, read and save the current logo, choose any PNG or JPG, and click Write. The image is converted to the radio's 160 x 128 screen and read back to verify.
How do I go back to the stock TD-H9 firmware?
Open the web flasher, connect the radio in PTT + 2 mode, select H9 Toolbox Firmware, back up the radio, and click Restore stock v1.0.38. Apps and your custom boot logo stay on the resource chip, unused, until you remove them or write the original logo back.
What do I need?
A TIDRADIO TD-H9 running official v1.0.38 (or an earlier Brick Breaker or H9 Toolbox install), a data-capable USB-C cable, and desktop Chrome or Edge. Apps and the boot logo also need the radio's Bluetooth programming mode. No software or account is required.
Is it safe?
The web flasher backs up the radio before writing, checks every sector before it erases anything, verifies every sector afterwards, can resume an interrupted install, and can restore stock at any time. Apps run only when you open them from the Back-hold menu. It is experimental and has been tested on one TD-H9, so keep your backup file.
Is H9 Toolbox affiliated with TIDRADIO?
No. H9 Toolbox is an independent, open-source project. The source and research notes are on GitHub at github.com/melidosian/h9toolbox.